TeleEye RV432, Инструкция по эксплуатации

Страница: 54 / 60

MDR Manual
53
VI. System Firmware Upgrade Procedure
There are 2 methods to upgrade the firmware in the MDR:
1.
Hard disk upgrade Instructions:
a) Connect and Enable the USB
b) Copy the romfs.dvr file by pressing ctrl + c or going to Edit -> Copy
c)
Open the ADS folder on the MDR HDD
d) Paste the file in the “ADS” folder by pressing ctrl + v or going to Edit -> Paste
e) Restart the unit. The system will start to upgrade automatically and the screen display with
“Upgrading in progress, please wait….”
f) During the upgrade [POW] and [ALM] LEDs will start to flash
g) Once completed the upgrade file will be deleted automatically
2.
Compact Flash upgrade Instructions:
A Compact Flash (CF) card can also be used to update the firmware in the unit. Please follow the
instructions to update the flash using the CF card:
a) Insert a CF card into the CF slot of your Windows PC (Drive letter appears)
b) Using Windows Explorer, format the CF card as FAT32 format. All the data will be permanently
erased from the CF card.
c) Copy the new firmware (romfs.dvr file) on the CF card
d) Remove the CF from the PC and insert it into the slot on your MDR while power off.
L
Notice! Please make sure the CF card insert as face down. (The CF card must show the
technical label upright and any graphics label on the face down.)
e) Upon turning the power on, the unit will automatically start to update the new firmware from the
CF card. During the upgrade [POW] and [ALM] LEDs will start to flash
f) Remove the CF card from the MDR unit once completed.
WARNING: The upgrade procedure requires no power interruption. The CF card slot on the
unit is a necessary opening on the unit. Please ensure that no liquid is spilled on the slot. In
addition, install the system where dust and dirt are also not likely to contaminate the opening.