TeleEye RV432, Инструкция по эксплуатации

Страница: 50 / 60

MDR Manual
49
V-4-2 Motion Detect Menu:
ALL CAMERA:
Enable all camera with motion detection (full area) by set as ON;
Enable the individual motion detection setting for each camera by set as OFF;
Configuration:
For each camera, enable / disable by ON/OFF in “MD” section;
Set ALL:
Full Screen as motion detection selection;
Area Set:
Select the area the allow to have motion detection block:
z Totally with 192 blocks on screen;
z Press ENTER to make the block in Green color as
active block and select the block with direction keys;
z Re-press “ENTER” to trigger off to make as transparent;
z Press “Setup” to make full screen selection;
z Re-press “Setup” to trigger off the full screen selection;
z When the motion detected in the block, it will shown as red color block;
LOCK MOTION:
To enable the event does not erase during the over-write process of hard disk;
LOG MOTION:
Enable the motion detection in the log record file;
Scroll to
APPLY
and press
ENTER
to save the new settings.