Teledyne TIENet 350, Инструкция по установке и эксплуатации

Страница: 32 / 45

TIENet ® Model 350 Area Velocity Sensor
Section 3 Setup and Programming for the Signature
3-5
3.2.2 Advanced Settings
The sensor is pre-programmed at the factory with the
Advanced
Settings
for your application. Should your application require
the addition of any correction factors, the Advanced button opens
the Advanced settings window (Figure 3-4).
Prior to making any changes to the Advanced settings, record the
factory settings in case you need to restore them later.
Input velocity coefficients can be adjusted for A, B, and C, where:
V = A (offset) + BV (slope) + CV
2
(second-order parameter).
Figure 3-4 Measurement setup: Advanced settings for 350 AV sensor
Advanced
Input Velocity Coefficients
A:
B:
C:
Warning: Any changes to the
following data can adversely
affect the performance of this
Instrument!
Select BACK to cancel or NEXT to
continue.
A + (B * v) + (C * v 2 )
1
0
0