Teledyne T3DMM6-5, Руководство пользователя

Страница: 106 / 121

Item No. of wires No. of channels
DCV,ACV 2 wires (H , L) 12 (CH1 ~ CH12)
DCI, ACI 1) 2 wires (H , L) 4 (CH13 ~ CH16) (2A Range Only )
2W Resistance 2 wires (H , L) 12 (CH1 ~ CH12)
4W Resistance 4 wires (Input H , L + sense H, L) 6 pairs (CH1 [input] & CH7[sense], 2&8, •••, 6&12)
Capacitance 2 wires (H , L) 12 (CH1 ~ CH12)
Diode/Continuity 2 wires (H , L) 12 (CH1 ~ CH12)
Period/Frequency 2 wires (H , L) 12 (CH1 ~ CH12)
Temp (Thermocouple) 2 wires (H , L) 12 (CH1 ~ CH12)
Temp (RTD) 2 wires (H , L) 12 (CH1 ~ CH12)
Remarks:
1)
For continuous current < 2.2 A, Accuracy ± (% 3 (reading) + 0.02 % (range)).
Channel Capabilities
Safety:
To achieve the best performance from the product, please read this section carefully. To
avoid electrical shock and personal injury, please don’t use the product to measure signals that
exceed the published specification.
The Teledyne Test Tools T3DMM6-5-SC Scanner capability is a ready installed multiplexer that
provides multi-point measurement capabilities to the T3DMM6-5-SC. The scanner features 12
multi-p 4 current channels and supports the following measurement functions: DCV, ACV,
DCI, ACI, 2WR, 4WR, CAP, FREQ, DIODE, CONT and TEMP (RTD and Thermocouple).
It provides a convenient and versatile solution for test applications that require multiple
measurement points or signals and is an ideal tool for R&D burn-in and production testing.
The scanner option is not available separately for the T3DMM6-5 or as an upgrade for the
T3DMM6-5.
Specifications
Please observe the specifications below to achieve the best performance from the T3DMM6-5-
SC scanner capability.
Maximum Switching power 37.5 VA / 30 W
Maximum Switching voltage 250 V AC / 220 V DC
Maximum Switching Current 1 A
Contact Life > 100000 operations, at 1 A 30V DC (at 0.5 Hz)
> 100000 operations, at 0.3 A 125 V AC (at 0.5 Hz)
Contact Resistance 75 mΩ (maximum at 6 VDC, 1 A)
Actuation Time 5 ms maximum on/off (channel to channel )
Insulation Resistance Minimum 1 GΩ ( 500 VDC )
Connector Type Clamp terminal, #24 AWG wire size
Remarks: Please do not use the scanner capability to measure signals that exceed the specifications as this can damage or reduce the life
of the scanner and cause electric shock or personal injury.