Teledyne SierraNet M408, Руководство пользователя, Страница: 61 / 248

SierraNet M408 User Manual 53
Analyzer Settings Teledyne LeCroy
10 GigE Configurations
Figure 2.25: Device Settings dialog for 10 GigE device.
You can manually calibrate the probe settings.
Set the parameters for the following:

Cable Type: Select Optical, 1m Copper or 3m Copper.

RX Eq DC gain: Select a value from the drop ‐ down list.

RX Eq Control: Select a value from the drop ‐ down list.

Advanced: Selecting Advanced displays the Advanced Probe Setting dialog. (See
Figure 2.26 .) Enter the desired values for each of the parameters.

Splitter: Selecting Splitter displays the Splitter Settings dialog. (See Figure 2.27
on page 54 .)

Apply Selected Settings to All: Applies the settings selected in the currently
selected port to all ports in the list.

Import: Loads calibration settings from *.csv file.

Export: Creates a new *.csv file.

Set as Bootup: Loads these settings into memory; rebooting will automatically
load these values.

Restore Factory Settings: Restores factory settings.