14
General Information
SeaBat UI - User Manual
Click on the highlighted AVI
to stop the AVI recording and the green
led indicator becomes the button again.
The AVI recording gives a good AVI in the Windows Classic Theme
and in the Windows 7 Basic Theme. In the Windows 7 Theme the
option does not support the screens from the Operation mode.
3.3.10 Start Record RDR
Click on RDR
to start the logging of the raw data. During the
recording the button
is changed to a green led indicator.
The log file will be stored as a S7K file with the filename
yyyymmdd_hhmmss.s7k in the location as defined in the Recording pane.
(see pagexxx) Also in this pane the records can be selected which have
to be recorded.
Click on the highlighted
text ‘RDR’ to stop the logging and the green led
indicator becomes a yellow/orange led, indicating that the logging is
stopped but that a small buffer is logged to get all the information. The led
will change to the button again after the buffer is logged.
3.3.11 Start the Tracker
Click on Tracker
to start the Tracker. When the Tracker is started
the button
is changed to a green led indicator.
The Tracker is a fully automated mode of operation. All parameters,
including range, gain, power and swath width are set by the system on
the basis of the quality of the collected data. Once the Tracker has been
selected, no further operator input is required.
Click on the highlighted
text ‘Tracker’ to stop the Tracker and the green
led indicator becomes the button again.
3.3.12 Pitch Stabilization
The pitch stabilization is
only available in the toolbar
when it is defined in the
xml file.
The led indicator will indicate if the pitch stabilization is on, off or gives an
error. The different colors are:
Blue
– When the SeaBat UI is started the pitch stabilization is not
yet initialized.
Grey
– The pitch stabilization is initialized but disabled in the
Hardware Settings.
Green
– The pitch stabilization is enabled and working.
Red
– Error level – Possible error is : no attitude data received.
To enable/disable and to setup the pitch stabilization see Motion
Stabilization on page 41.
3.3.13 Roll Stabilization
The roll stabilization is only
available in the toolbar
when it is defined in the
xml file.
The led indicator will indicate if the roll stabilization is on, off or gives an
error. The different colors are:
Blue
– When the SeaBat UI is started the roll stabilization is not yet
initialized.
Grey
– The roll stabilization is initialized but disabled in the
Hardware Settings.
