Teledyne PIXIS-XF, Системное руководство

Страница: 27 / 116

27
Chapter 4: System Setup
WARNING!
To minimize risk to users or to system equipment, turn the
system off before any cables are connected or
disconnected.
A PIXIS-XF camera system consists of three or four hardware components:
• Camera head;
• Cables;
• Power supply;
• CoolCUBE
II
(shipped with the water-cooled camera.)
All of the components and cables required for your configuration are included with
your shipment. Your PIXIS-XF system has been specially configured and calibrated to
match the camera options specified at the time of purchase.
Keep all of the original packing materials so you can safely ship the PIXIS-XF system to
another location or return it for service if necessary. If you have any difficulty with any
step of the instructions, call Teledyne Princeton Instruments Customer Support. Refer
to
Contact Information on page 114 for complete information.
Hardware installation may consist of:
• Installing a USB 2 interface card, if one is not already installed in the host
computer;
• Connecting the camera to external triggering or monitoring equipment.
Software installation depends on the application software you will be using to run the
system. Refer to the manual supplied with the software for information about installing
and setting it up.
4.1 Unpack the System
During the unpacking, check the system components for possible signs of shipping
damage. If there are any, notify Teledyne Princeton Instruments immediately and file a
claim with the carrier. If damage is not apparent but the camera cannot be operated,
internal damage may have occurred in shipment. After unpacking the system, save the
original packing materials so you can safely ship the camera system to another location
or return it to Teledyne Princeton Instruments for repairs if necessary.