7
Micropublisher 6
TM
User Manual
Figure 2. Teledyne Photometrics USB3 camera is the only device on its USB Root Hub.
If more devices are connected to the same USB Root Hub, please reconnect them to a different port for optimal camera
performance.
Note on Optimum Mounting of MicroPublisher 6 Camera
It is important to maintain a minimum of 1” clearance on the vented sides of the MicroPublisher 6 camera to allow proper
air flow, removing heat generated by Thermoelectric Cooling of the sensor. Blocking this air flow will impede the camera’s
ability to cool, and may cause the camera to overheat. While the camera has thermal shutdown protection, overheating the
camera may cause permanent and irreparable damage, voiding your warranty.
