18
Micropublisher 6
TM
User Manual
I/O Connector Pinout
The I/O (Input/Output Status) connector provides information about trigger function. Inputs must be at least 3.15 V for a high
and less than 0.9 V for a low.
The I/O trigger cable connects to Hirose connector HR212-10RA-8P on the back of the camera. Below is a description of
each of the trigger pins. The numbers on the I/O connector diagram correspond to the numbers given to the definition of
each of the pins.
Pin #
Signal
Pin #
1
Ground
5
Expose Out
2
Ground
6
Trigger In
3
Shutter Output
7
No Connection
4
Frame Readout
8
No Connection
