WaveStation 3000 Function and Arbitrary Waveform Generator
Generating a DC Waveform
DC waveforms cannot be conditioned using Mod(ulate), Sweep, or Burst.
1. Choose your output channel by pressing the
Ch1/Ch2
function button until the correct tab is active on the
display.
NOTE
: WaveStation defaults to the Channel 1 tab and Waveform menu whenever you power on, although
you can
change this setting
on the Utility menu. If Channel 1 is correct, skip to Step 2.
2. Press the
Waveform
function button to open the Waveform menu, then press the
More 1 of 2
softkey.
3. Press the
DC
softkey.
4. Enter the
DC Offset
value.
5. Press the appropriate
Output
button to output the waveform.
S
EE
A
LSO
:
Generating Basic Waveforms
Generating Arbitrary Waveforms
Recalling Stored Waveforms
14
922869 Rev B
