manualshive.com logo in svg

Teledyne First Responder CG, Руководство пользователя, Страница: 94 / 104

Поделиться
Скачать
Teledyne First Responder CG Скачать руководство пользователя страница 94

C-10

APPLICATIONS

FIRST RESPONDER CG - USER HANDBOOK

The Swan Neck Probe (Part No. 13655) has a number of 

small balanced holes in the probe length to give increased 

coverage in surveys. To prevent damage to the probe 

and provide an unrestricted sample path, the probe is 

supplied with a shroud assembly incorporating two skids 

which prevent probe contact with the ground surface. The 

Swan Neck Probe is of stainless steel construction and is   

generally used with the Probe Adaptor which connects to 

the Probe Handle Assembly (Part No. 13561). The Probe 

Handle incorporates a sample line which is connected to the 

instrument and allows the pump to draw the sample into the 

instrument analysing chamber. 
Note: This model of Probe Handle does not incorporate an 

in-line filter. A Water Filter Assembly (Part No. 42183) or 

Dust Filter Assembly (Part No. 42184) is available and can 

be fitted as an accessory, if required. Refer to Chapter 7 

ACCESSORIES. 

Содержание First Responder CG









































































































Отзывы:

Нет отзывов