Teledyne First Responder CG Скачать руководство пользователя страница 13

Страница: 13 / 104

1-3

INTRODUCTION

FIRST RESPONDER CG - USER HANDBOOK

The First Responder CG is supplied in a carrying case

with a selection of accessories. For a comprehensive list

of accessories supplied with the instrument, and additional

accessories available, see Section 7 ACCESSORIES.

The main features of the instrument are:

•

Rugged polypropylene case, sealed to IP54 rating

and suitable for outdoor use.

• Four button operation allowing the user access to

all features.

•

LCD with backlighting which displays the current gas

readings (in both digital and analogue forms) together

with operational and status information.

•

Audible and visual alarms with alarm levels pre-set.

•

Automatic datalogging.

•

Directly interfaces with the GMI Automatic Test /

Calibration Unit (GDU

net

Содержание First Responder CG









































































































Результаты поиска

Содержание First Responder CG

Отзывы:

Teledyne First Responder CG, Руководство пользователя, Страница: 13 / 104

Результаты поиска

Содержание First Responder CG

Отзывы: