Teledyne First Responder CG Скачать руководство пользователя страница 23

Страница: 23 / 104

2-9

GENERAL INFORMATION

FIRST RESPONDER CG - USER HANDBOOK

Fig. 2-8 Automatic Datalogging Enabled

During automatic datalogging the instrument stores the

values of all gas ranges together with the current time and

date at 60 second intervals.

Manual Datalogging

By default, the instrument has manual datalogging enabled

in all modes (CGI, CSM, PURGE and TRAC).
The user can initiate a manual log with a double press of

(Button 3), if the pump is running.

Construction

The instrument is housed in a tough, impact resistant,

moulded case made of polypropylene.
The top panel is protected by a stainless steel top plate

covering a toughened glass LCD cover.
The battery cover is attached to the main instrument body

by means of two stainless steel hexagonal screws.
The instrument is sealed against dust and water to IP54

standard. The instrument sensors are protected from dust

and water by membrane and cotton filters, when using

probe handle assembly (Part No. 12481). Other probes with

associated filters are available as accessories.

Содержание First Responder CG









































































































Результаты поиска

Содержание First Responder CG

Отзывы:

Teledyne First Responder CG, Руководство пользователя, Страница: 23 / 104

Результаты поиска

Содержание First Responder CG

Отзывы: