Teledyne EV71YC1MCL2010-BA0, Руководство пользователя

Страница: 24 / 59

U
SER
M
ANUAL
M
ONOCHROME
– R
EV
J – 05/2017 P
A G E
| 24
7.4 Image Format
GenCP address ASCII
command
GenICam
command
Size R/W Description
0x12000 snsw SensorWidth 4 R Pixels number (can be set for versatile model)
- - SensorHeight 4 R 1
- - WidthMax 4 R Pixels number (can be set for versatile model)
- - HeightMax 4 R 1
- - Height 4 R 1
- - Width 4 R Pixels number (can be set for versatile model)
0x12004 smod SensorMode 4 RW Depending the model of the camera
0 : 4096 Pixels, 5x5µm
1 : 2048 pixels 10x10µm
2 : 1024 pixels 10x10µm (Versatile only)
3 : 512 pixels 10x10µm (Versatile only)
4 : 4096 pixels 5x10µm (Versatile only)
0x12008 revr ReverseReading 4 RW 0 : disable
1 : enable
0x1200C mode OutputMode 4 RW 0 : Base 2 Outputs 8-bit
1 : Base 2 Outputs 10-bit
2 : Base 2 Outputs 12-bit
3 : Medium 4 output 8-bit (
High Speed only)
4 : Medium 4 output 10-bit ( High Speed only)
5 : medium 4 output 12-bit ( High Speed only)
6 : full 8 output 8-bit ( High Speed only)
7 : full+ 10 output 8-bit ( High Speed only)
8 : Base 1 Output 8-bit
9 : Base 1 Output 10-bit
10 : Base 1 Output 12-bit
0x12010 clfq OutputFrequency 4 RW Configure the CameraLink Interface frequency
0 : 85MHz
1 : 60MHz
2 : 42.5 MHz
3 : 40MHz
0x12014 srce TestImageSelector 4 RW 0 : “Off” (Sensor image)
1: “GreyHorizontalRamp”
2 : “whitePattern”
3 : “GrayPattern”
4 : “BlackPattern”
5 : “GreyVerticalRampMoving”
0x12018 temp Temperature 4 RO Read temperature value
Format : Integer in degree Celsius
0x1201C itrl Interlaced 4 RW 1 : Base 2 outputs, Medium or Full are interlaced
0 : Base 2 outputs, Medium or Full are adjacent