Teledyne EV71YC1MCL2010-BA0, Руководство пользователя

Страница: 14 / 59

U
SER
M
ANUAL
M
ONOCHROME
– R
EV
J – 05/2017 P
A G E
| 14
3.2.3 Status LED Behaviour
After less than 2 seconds of power establishment, the LED first lights up in ORANGE. Then after a Maximum
of 3 seconds, the LED must turn in a following colour :
Colour and state Meaning
Green and continuous OK
Green and blinking slowly Waiting for External Trigger (Trig1 and/or Trig2)
Red and continuous Camera out of order : Internal firmware error
Orange and Continuous Camera booting or upgrading
3.2.4 CameraLink Output Configuration
Output Configuration Channels Pixels per Channel
Version “Essential” 4k 2k 1k 0,5k
Base : 1 Channel 8/10/12bits 1 x 85MHz
(60/42.5MHz)
1 x 4096 1 x 2048 1 x 1024 1 x 512
Base : 2 Channels 8/10/12bits 2 x 85MHz
(60/42.5MHz)
2 x 2048 2 x 1024 2 x 512 2 x 256
Version “High Speed”
Base : 1 Channel 8/10/12bits 1 x 85MHz
(60/42.5MHz)
1 x 4096 1 x 2048 1 x 1024 1 x 512
Base : 2 Channels 8/10/12bits 2 x 85MHz
(60/42.5MHz)
2 x 2048 2 x 1024 2 x 512 2 x 256
Medium : 4 Channels 8/10/12bits 4 x 85MHz
(60/42.5MHz)
4 x 1024 4 x 512 4 x 256 NR
Full : 8 Channels 8bits 8 x 85MHz
(60/42.5MHz)
8 x 512 8 x 256 NR NR
Deca : 10 Channels 8bits 10 x 42.5MHz
(60/85MHz)
10 x 409 NR NR NR
-
NR : Not required as the fastest speed (100kHz) is already achieved by the precedent output mode with the
lowest data rate (ex : 100kHz is achieved on 512 pixel in base mode with 2 x 42.5Mhz. Medium is not
required, even for 10bits.