Teledyne EV71YC1MCL2010-BA0, Руководство пользователя

Страница: 21 / 59

U
SER
M
ANUAL
M
ONOCHROME
– R
EV
J – 05/2017 P
A G E
| 21

Manufacturer Info ( ManufacturerInfo ) : Camera Part Number set by in factory in a 64Bytes String.

Read function (ASCII): “ r idnb ”;
Returned by the camera : <Part Number> String of 64 bytes (including “/0”)

Can’t be written

Serial Number ( DeviceID ) : Camera serial Number set by in factory in a 64Bytes String.

Read function (ASCII): “ r deid ”;
Returned by the camera : Serial Number of the camera in a String of 64 bytes (including “/0”)

Can’t be written

Device User ID ( UserDefinedName ) : Camera identifier set by the User in a 64Bytes String.

Read function (ASCII): “ r cust ”;
Returned by the camera : String of 64 bytes (including “/0”)

Write function (ASCII): “ w cust <idstr> ”
7.2 Device Privilege, Status and Reboot
GenCP address ASCII
command
GenICam
command
Size R/W Description
0x17040 lock PrivilegeLevel 4 RW Read:
-
0 : Factory
- 1 : Advance User
-
2 : User
Write :
-
1 : change mode from factory to
AdvanceUser
- 2 : change mode to User
- Other: key to unlock the camera
0x17048 stat
Status
4 RO
Camera Status; bit set when :
Bit0
:no trigger during more than 1s
Bit1 : trigger too fast
Bit2 : reserved
Bit8 : overflow occurs during FFC calibration
Bit9 : underflow occurs during FFC calibration
Bit16 : hardware error detected
0x17050 boid BoardID 32 R Unique Board Identification. Written by the
camera manufacturer or test bench
0x17070 bost BoardStatus 16 R Give the status of the board. Written by the
camera manufacturer or the test bench
0x17080 boot
RebootCamera
4 WO
Reboot the camera with a command
- 1 restart the camera (like a power cycle)
-
2 restart only camera application (bypass
upgrade application)