Teledyne DALSA Piranha 2 P2-2x-01K40, Руководство пользователя

Страница: 77 / 86

77 Piranha 2 User’s Manual
03-032-00493-14 Teledyne DALSA
Code Command Short
Form Parameters Description
512
1
i
PixelPRNU
 
37 set_su btract_backgrou nd ssb t i Su btracts the inp u t valu e from
the ou tp u t signal. The first
p aram eter is the tap selection 1
to 4, or 0 for all tap s. The
second p aram eter is the
su btracted valu e range from 0
to 511.
38 set_sync_frequ ency
ssf i
Sets the line rate, in exp osu re
m od e 2, to a valu e from
1000H z to cam era's m axim u m
line rate. Valu e rou nd ed
u p / d ow n as requ ired .
39 set_system _gain
ssg t i
Set the d igital gain. The first
p aram eter is the tap selection 1
to 4, or 0 for all tap s. The
second p aram eter is a gain
valu e is sp ecified from 0 to
511.
40 set_u p p er_threshold sut i Set u p p er threshold to a valu e
from 0 to 255 in 8-bit d ata
m od es, and 0 to 1023 in 10-bit.
41 set_vid eo_m od e
svm i
Sw itch betw een calibrated and
u ncalibrated m od es:
0
: Uncalibrated vid eo,
d eactivate vid eo correction
1
: Calibrated vid eo, activated
correction
2
: Test p attern
42 verify_tem p eratu re vt Check the internal
tem p eratu re of the cam era.
43 verify_voltage vv Check the cam era voltages an d
retu rn OK or fail.
44 w arning_enable_d isable wed [i] [i] Read enable/ d isable statu s of
all d efined m onitoring tasks.
Op tionally, the first p aram eter
selects a m onitoring task and
the second p aram eter
enables/ d isable the selected
task.
45 w rite_p ixel_coeffs
wpc
Write all cu rrent p ixel
coefficients to EEROM.
46 w rite_u ser_settings
wus
Write all of the u ser settings to
EEROM excep t p ixel
coefficients w hich are w ritten
u sing the
wpc
com m and .
Parameters:
i
= integer
f
= float
t
= tap selector
s
= string
x1
= pixel start
number
x2
= pixel end number
[]=
optional
parameter