Teledyne CP030, Руководство оператора

Страница: 17 / 32

Operator’s Manual
11
Operating with an Oscilloscope
When connected to a Teledyne LeCroy oscilloscope, the displayed scale factor and
measurement values will be adjusted to account for the effective gain of the probe.
A/div, Offset, and Coupling, and Bandwidth (BWL) are controlled from the Channel
setup (Cx) dialog.
Channel setup dialog with Probe dialog behind it.
The probe’s attributes are shown on the Probe dialog, which appears behind the
Channel dialog when a probe is detected. The Probe dialog also contains controls for
Auto Zero and Degauss.
Probe dialog.
Probe A/div and Attenuation
The front panel Volts/div knob controls the oscilloscope’s scale factor and the probe’s
internal attenuation to give full available dynamic range from 10mA/div to 15 A/div for
CP030 and CP031, or 1 mA/div to 15 A/div for CP030A and CP031A. CP031A and
CP031A will automatically adjust attenuation based on the A/div setting.
Alternatively, A/div may be controlled from the channel setup dialog (Cx).
Bandwidth Limit
The probe is capable of switching from Full (maximum bandwidth) to 20 MHz
bandwidth by changing the Bandwidth setting on the Cx dialog.