TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook GD10-P00, Руководство по эксплуатации

Страница: 32 / 60

GD10-P00 and GD10-PE0
INFRARED POINT GAS DETECTOR
OPERATING MANUAL
26 850-811250
Revision 13b
Most of the commands are only requests to read information from the detector. The commands
shaded as grey with bold text gives the operator possibility to make changes to individual
parameters, and these commands are described further in the following sections.
Some of the following commands require a maintenance password to be
executed.
Default password is: SIMTRONICS
Use command #LINSIMTRONICS to log as a maintenance user.
This mode is automatically deactivated after 10 minutes without further action.
6.2.4 Detailed description of selected commands
When one of the following commands are activated, the operator is navigated to one or several
data input screens where detailed data can be entered, or predefined options selected. Detailed
navigation between the commands is not explained, as this is part of the user interface of the
actual HART® communicator.
6.2.4.1 TAG (Basic setup)
The operator can write an alphanumeric text, max 8 characters. Default is “GD10P”.
6.2.4.2 Long tag (Basic setup)
The operator can write an alphanumeric text, max 32 characters. Default is “Long Tag”.
6.2.4.3 Descriptor (Basic setup)
The operator can write an alphanumeric text, max 16 characters. Default is “GD10P”.
6.2.4.4 Date (Basic setup)
The operator can write a date on the format MM/DD/YY. Default is “**/**/**”.
6.2.4.5 Message (Basic setup)
The operator can write an alphanumeric text, max 32 characters. Default is “OLDHAM
SIMTRONICS”.
6.2.4.6 Final asmbly num (Basic setup)
The operator can define a number between 0 and 16777215.