TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook GD10-P00, Руководство по эксплуатации

Страница: 15 / 60

GD10P00 and GD10PE
INFRARED POINT GAS DETECTOR
OPERATING MANUAL
850-811250
Revision 13b
9
3 GD10PE Technical specifications
GENERAL
Detection method
IR-absorption, dual wavelength, dual path
IR-Source Solid state IR source, 32 Hz flash
Detection range 0-20% LEL (0-1% Vol.) methane
Gases detected
( 8)
Hydrocarbons
Self-test Continuous
Calibration Factory set, no field recalibration
PERFORMANCE
Lifetime stability
±1.4%LEL
Accuracy ±1%LEL (0-10 % LEL reading)
±1.4%LEL (10-20 %LEL reading)
Response time
( 9)
T20 = 0.8 sec.
T50 = 2.1 sec.
T90 = 5 sec.
Start-up time Less than 60 sec
10
., full specification obtained after 30 min. warmup
time
8
The detector is intended to measure the gas for which it is indicated
9
In natural diffusion and without the weather protection. The response time does not depend on the gas. This response time is
available on any of the outputs of the device and is determined by the time of response of all parts of equipment within the gas
detection system.
10
Sometimes, under very specific conditions, start-up can be longer. Please refer to 5.2 for additional details