TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook DG-TT7-K, Руководство по эксплуатации

Страница: 11 / 72

MULTIXPLO AND MULTITOX DETECTORS
OPERATING MANUAL
NOSP17665
Revision 02a
5
1.6.2 Magnetic wand
The detector includes two magnetic sensors PG1 and PG2
implanted on both sides of housing.
The communication interface is a magnetic wand. The wand gives
access to information, state and configuration about the detector
as the TLU (see §6.11).
1.6.3 HART communication
The HART communication authorizes an addressing of devices,
allowing the communication in read/write mode.
It consists in getting connection on the current loop on which the
numerical data are superimposed.
Most of the HART terminal can read these information and send
commands
The use of a DD (Device Descriptor) facilitates the interface Man-
Device. It can be uploaded on our website.
The HART output is an option. It is available only on the devices
equipped with an electronic type C, in HART configuration
(H):DGi-**7-****-**H-**-***-*-C-*
TELEDYNE OLDHAM SIMTRONICS devices under HART protocol enable the
use of all the functions available with the TLU600 via the HART terminal
See the document D1401002 for the using of Hart terminal TLH700 (the Detector Device
Descriptor must be downloaded).