TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook DG-TT7-K, Руководство по эксплуатации

Страница: 61 / 72

MULTIXPLO AND MULTITOX DETECTORS
OPERATING MANUAL
NOSP17665
Revision 02a
55
Accessories Designation Description Part Number
SX202 / MTHX-S
calibration cup screwed on the sensor (external
probe only) AS205 
Magnetic wand Used for setting and maintenance AS055
 Detector sensitivity is not modified, response time depend on the flow rate used for injection.
A flow rate between 0.5 L/min and 1 L/min should comply with “standard” response time.
When using an AS005 with a DG-TX7-X, it is recommended to inject gas through the side of the
calibration cup.

Detector sensitivity is not modified; response time can increase depending on the molecular
filter used.

Detector sensitivity is not modified, response time (T90) (natural diffusion condition) is
increased by 50%.

Detector sensitivity and response time are not modified.
 This accessory is included into the EN60079-29-1 Performance Certificate.
Wipe non-conductive parts (plastic) that can use in ATEX area with a damp cloth
(risk of electrostatic charges)
9.2 Spare parts
•
O-ring spare parts
•
For the base (All models) - O-ring kit BT10
•
Lubricant for explosion proof seal and thread: MOLYKOTE Brand, reference P40.
•
Combustible gas detector cartridges : DM-SX6-SADG-XX0-X0 (gas to specify)
•
Catharometer cartridges : DM-SX6-SADG-KX0-X0 (gas and range to specify)