Teledyne Analytical Instruments 3000PA-EU, Руководство по эксплуатации

Страница: 13 / 87

1-4
1 Introduction 1 Introduction
1 Introduction 1 Introduction
1 Introduction Model 3000PA
Teledyne Analytical Instruments
• System Perform system-related tasks (described in detail in
chapter 4, Operation.).
• Span Span calibrate the analyzer.
• Zero Zero calibrate the analyzer.
• Alarms Set the alarm setpoints and attributes.
• Range Set up the 3 user definable ranges for the instrument.
Data Entry Keys: Six touch-sensitive membrane switches are used to
input data to the instrument via the alphanumeric VFD display:
• Left & Right Arrows Select between functions currently
displayed on the VFD screen.
• Up & Down Arrows Increment or decrement values of
functions currently displayed.
• Enter Moves VFD display on to the next screen in a series.
If none remains, returns to the
Analyze screen.
• Escape Moves VFD display back to the previous screen in a
series. If none remains, returns to the Analyze screen.
Digital Meter Display: The meter display is a LED device that
produces large, bright, 7-segment numbers that are legible in any lighting
environment. It produces a continuous readout from 0-100 %. It is accurate
across all ranges without the discontinuity of analog range switching.
Alphanumeric Interface Screen: The VFD screen is an easy-to-use
interface from operator to analyzer. It displays values, options, and
messages that give the operator immediate feedback.
Flowmeter: Monitors the flow of gas past the sensor. Readout is 0.2
to 2.4 standard liters per minute (SLPM).
Standby Button: The
Standby
turns off the display and outputs,
but circuitry is still operating.
CAUTION: The power cable must be unplugged to fully
disconnect power from the instrument. When
chassis is exposed or when access door is open
and power cable is connected, use extra care to
avoid contact with live electrical circuits.
Access Door: To provide access to the Micro-Fuel Cell and the front
panel electronics, the front panel swings open when the latch in the upper
right corner of the panel is pressed all the way in with a narrow gauge tool.