manualshive.com logo in svg

Telect LCX Series, Руководство пользователя

Поделиться
Скачать
Telect LCX Series Скачать руководство пользователя страница 32

Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 126254-4 A0.1

Page 3-27

Chapter 3: Panel Installation

3.1 Installation Considerations

WARNING

 

!

WARNING! Fiber cables transmit invisible infrared light. To avoid eye damage or blind-
ness, never look directly into fibers or connectors.

ALERT

!

ALERT!  Only qualified technicians may install and maintain this product. 

ALERT! These instructions presume you have verified that the Telect equipment being 
installed is compatible with the rest of the system, including power, ground, circuit 
protection, signal characteristics, equipment from other vendors, and local codes 
or ordinances.

3.1.1 Location & Space

LCX Fiber Panels adapt to standard 19 in., 23 in., or ETSI racks with WECO, EIA, or ETSI 
spacing and nominal 3¼-in. extensions beyond the front rack flange.

Plan the input/output, upward/downward (cable feed) layout of each panel and its position in the 
rack before beginning LCX panel installation. If you plan to pass fiber strands, cable, and/or 
tubing through the knocked-out holes in the tops and bottoms of the panels, the panels should be 
mounted in contiguous vertical rack spaces.

3.1.2 Tools & Equipment

No special tools are required.

3.1.3 Inspection

Please read these instructions carefully before beginning installation. If you need assistance, call 
Technical Support at 1-888-821-4856 (domestic calls), or 509-921-6161 (Option 2), or email us 
at [email protected].

Inspect equipment after unpacking and compare it to the packing list. 

Immediately report any shipping damage, defects, or missing parts to Telect at 1-800-551-4567. 
Keep all documentation that comes with your shipment.

Telect is not liable for shipping damage. If the product is damaged, notify the carrier and call 
Telect’s Customer Service Department at 1-800-551-4567 (domestic only) or 1-509-926-6000 for 
further recourse.

Содержание LCX Series
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды