Telect 125DM08 Скачать руководство пользователя страница 4

Страница: 4 / 18

1.509.926.6000 :: telect.com

Demarcation Fuse/Circuit Breaker Alarm Panel

Power :: Model 125DM08

1.2 Specifications

Inputs/Outputs:

Specification:

Max. Rating Single-Pole, Circuit Breaker (each)

100A

Max. Rating TFD Holder, Schematic C

125A (TLS Fuse); 70A (TPS Fuse)

Max. Continuous Output Load (each)

80% of rated

Max. Total Load Rating of Panel

800A continuous

Voltage Range

±20 to ±28 Vdc

-40 to -60 Vdc

BATT & RTN Wire Size

#8 to #1 AWG

Ground Wire Size

#10 to #2 AWG (depends on input fuse)

Terminal Stud Sizes

(Input, Output, and Earth Ground)

¼-20 dual studs on 5/8” centers

¼-20 dual PEMs on 5/8” centers (side ground)

Power Dissipation

17W per I/O

Short-Circuit Withstand Rating

5000A

Alarms:

Specification:

Alarm Relay Contacts

0.6A @ 60 Vdc

Alarm Card Power Rating

Alarm Wire Size

Solid: #26 to #22 AWG

Weight:

Specification:

Weight, Shipping

~20 lb (~9 kg) - 125DM08
~22 lb (~10 kg) - 125DM08-TFD

Dimensions:

Specification:

Nominal, without brackets:

Width

Height

Depth

17.25 in (43.8 cm)

3.5 in (8.9 cm)

10.84 in. (27.6 cm)

Environment:

Specification:

Operating Temperature

-5°C (23°F) to 50°C (131°F)

1.3 Inspection

Please read these instructions carefully before beginning installation. If you need assistance, call Technical

Support at 1.888.821.4856 (domestic calls), or 509.921.6161 (Option 2), or email us at [email protected].

Inspect equipment after unpacking and compare it to the packing list. Immediately report any shipping damage,

defects, or missing parts to Telect at 1.800.551.4567. Keep all documentation that comes with your shipment.

Содержание 125DM08

















Результаты поиска

Содержание 125DM08

Отзывы:

Telect 125DM08, Руководство по установке, Страница: 4 / 18

Результаты поиска

Содержание 125DM08

Отзывы: