Telect 125DM08 Скачать руководство пользователя страница 3

Страница: 3 / 18

1.509.926.6000 :: telect.com

Demarcation Fuse/Circuit Breaker Alarm Panel

Power :: Model 125DM08

1.1 Overview

Telect’s Demarcation Fuse/ Circuit Breaker Panel with

Alarms provides TPS/TLS fuse or circuit breaker

protection at the equipment interface. The 2RU, white

panel supports

Figure 2 - 125DM08 - TFD

Front

Rear

Figure 1 - Model 125DM08 (UL Listed, File E139903)

• eight TFD fuse holders

• bullet-style, standard-trip circuit breakers with

rear access terminals

and

• a replaceable alarm card containing power and

alarm LEDs, with rear-access, wire-wrap alarm

relay contacts

Each fuse holder or circuit breaker position has

separate BATT/RTN inputs and outputs rated up to

125A for \-24Vdc or -48Vdc applications.

Hardware is included for either flush or extended

mounting in a 19-in. or 23-in. relay rack. Visit our

website (www.telect.com) to order accessories and

replaceable parts: fuses (up to 125A),TFD fuse holder,

circuit breakers (up to 100A), ETSI mounting brackets,

and more.

NOTE: The 125DM08-TFD includes eight TFD

holders installed.

Содержание 125DM08

















Результаты поиска

Содержание 125DM08

Отзывы:

Telect 125DM08, Руководство по установке, Страница: 3 / 18

Результаты поиска

Содержание 125DM08

Отзывы: