Teleconnect SHDSL.EVB.4CH, Руководство пользователя

Страница: 15 / 37

SHDSL.EVB.4CH User Manual
Revision: 1.0.0, 2019-02-05 15/37 shdsl@teleconnect.de
Table 4: Pin Definition of X601
Pin Number Pin Name / Function
1 + 5 V (4.7
… 6.0 V)
2 - (Ground)
The pin header X801 is not mounted by default. It is possible to mount it on both PCB sides
getting an adapter or using the SHDSL.EVB.4CH as module.
The Micro USB connector is also usable for data transmission to the processor. In that case
UART emulation provides a serial interface.
3.6 Power Consumption
The power consumption of the SHDSL.EVB.4CH Evaluation Board is nearly independent from
the traffic on the line. It is maximum 4,9 W.
Boundary conditions:
•
Intel
®
SHDSL Chipsets (PEF 24628 E)
•
Firmware: 3.0-R2563
•
Function: CO
•
Cable length: 1 m
•
Power Back Off inactive
•
Power 5 V
Table 5: Power Consumption of the SHDSL.EVB.4CH Evaluation Board with full traffic
1-Channel
Bitrate [Kbps]
per SHDSL line
Power [mA] Power Consumption [W] TCPAM Ethernet active
no connection 630 3,15 auto no
192 710 3,55 16 yes
512 710 3,55 16 yes
2048 720 3,60 16 yes
5696 740 3,70 32 yes
15288 740 3,70 128 yes
4-Channel
Bitrate [Kbps]
per SHDSL line
Power [mA] Power Consumption [W] TCPAM Ethernet active
no connection 660 3,30 auto no
192 800 4,00 16 yes
512 800 4,00 16 yes
2048 890 4,45 16 yes
5696 940 4,70 32 yes
15288 940 4,70 128 yes
3.7 Serial Interface (UART)
SHDSL.EVB.4CH features a serial interface (UART) for controlling and monitoring purposes.
The interface is usable in two ways: UART emulation via USB interface and TTL-compatible
interface via connector X601. Both interfaces have the same function and can work
simultaneously.