SHDSL.EVB.4CH User Manual
Revision: 1.0.0, 2019-02-05
34/37
7
Using SHDSL.EVB.4CH as Module
7.1
Scope
The main goal of SHDSL.EVB.4CH is a simple evaluation platform of the Intel
®
SHDSL
Chipset. Beside this it is possible to use SHDSL.EVB.4CH as SHDSL EFM module. That is
why SHDSL.EVB.4CH is made in a small form factor, not typical for evaluation platforms. This
may be interesting for small volume applications.
This chapter covers using SHDSL.EVB.4CH as a module.
7.2
Connection
If SHDSL.EVB.4CH is used as module, it can power up via X801. Please connect pin 1 to + 5
V (4.7
… 6.0 V) and pin two to Ground. The SHDSL line should connect to X105, X106, X108
and X109 and the Ethernet interface to X302. Optionally, a control and monitor interface are
available to connect at X601. If you want to use it, please connect it to serial interface of host
processor. There is one mounting hole at EVB. It can be used for fixing the EVB to the host
board via an M2.5 screw.
The pin header connectors X105, X106, X108 and X109, X302, X601 and X801 are not
mounted by default and can be populated if necessary.
The connectors X107, X304 and X604 are not used and should be left open.
7.3
Protection
The SHDSL.EVB.4CH is conceptualized as an evaluation platform. For this, SHDSL.EVB.4CH
includes only basic protection. It is possible to add additional protection circuits on the host
board to use SHDSL.EVB.4CH in rough environments.
For further assistance you can contact Teleconnect at
.
