7
P3
P3
3X
2.1 - Memorization of a single channel
1- Press once
MEM
button
and hold it down; the buzzer
will make a beep then sound
continuously.
2- During the sound press the button to
memorize; the memorization is indicated
by the intermittent sound of the buzzer.
2 - Transmitters memorization
Before starting select the output
CH1
or
CH2
, using the jumper (see picture at page 5). The following
memorization/deletion will be applied only to the selected output. Anyway it’s possible to associate a single or
double channel to both of the output, repating the procedure.
Note:
in case of commanding an output with TIMER function, it’s possible to stop the counter before the set
time using buttons CH2, CH4 or CH7.
2.2 - Memorization of a double channel (CH1-2, CH3-4, CH6-7) with ON/OFF function
1- Press
two times
MEM
button and hold it down the
second time; the buzzer will
make two beeps then sound
continuously.
2- During the sound press the button to
memorize; the memorization is indicated
by the intermittent sound of the buzzer.
2.3 - To copy a function of a transmitter to a new transmitter
2- Within 5 seconds press a button of the
memorized transmitter
from which the
function has to be copied. The buzzer will
interrupt the sound for 1 sec. then start
again for 5 seconds.
3- During the sound press the
button of the
new transmitter
to memorize; the memorization
is indicated by the intermittent
sound of the buzzer.
Transmitter in the memory
New transmitter
1- Press the button
P3
located
inside the already
memorized
transmitter
. The enabled
receiver sound continuously.
3.1 - To delete a single/double channel
3.3 - To delete a single/double channel using the transmitter
2- During the sound press
the button to delete; the
deletion is indicated by the
continuous sound of the
buzzer.
1- Press
three times
the button
P3
located inside the transmitter.
The buzzer will sound intermittently
and slowly.
Transmitter in the memory
1- Press
once
the button
DEL
and hold it down; the
buzzer will make a beep
then sound intermittently and
slowly.
2- During the sound press the button to
delete; the deletion is indicated by the
continuous sound of the buzzer.
Transmitter
in the memory
Transmitter
in the memory
3.2 - To delete all the transmitters
Press
twice
the button DEL and hold it down the second time for
10 seconds
.
The buzzer will sound intermittently; at the end the buzzer will sound continuously
indicating that the memory has been cancelled.
