Teleco FlatSat Elegance, Руководство по установке

Страница: 5 / 36

Assembly instructions
1) Position the Black Box in an easy accessible, ventilated compartment.
2) On the roof of the vehicle, choose a free area large enough to allow the antenna to
revolve (Fig. 2).
3) Install the connection cables (Grey and White) until you reach the powered OUTSIDE
UNIT installation area.
4) Clean the roof carefully in the area the OUTSIDE UNIT is to be installed in.
5) Remembering that the OUTSIDE UNIT must be fastened as shown on Fig. 3, remove
the BASE PLATE from the outside unit, unscrewing all 4 nuts.
6) Position the base plate as shown on Fig. 4, with the short side towards the driving
direction of the vehicle.
2
1
Flat Sat Elegance 650 - 140 cm
Flat Sat Elegance 850 - 160 cm
Driving direction
of the vehicle
4