Teleco FlatSat Elegance, Руководство по установке

Страница: 6 / 36

5
When they are present, remove the transparent films from the BASE PLATE (Fig. 5) .
7) Clean the lower part of the BASE PLATE carefully, applying a layer of glue on the
whole surface (e.g. SIKAFLEX).
8) Fasten the BASE PLATE to the roof (short side towards the vehicle driving direction),
now fasten the external powered unit to the four stud bolts of the plate, using the four
nuts supplied with the equipment.
Caution: to ensure ideal nut tightening and prevent possible pin breaks, tighten
the nut with a torque wrench set to 8 Newtons/metre
Driving direction
of the vehicle
9) Apply a layer of silicone all around the BASE PLATE in order to make it completely
waterproof (Fig. 5A)
5 5A
4
3
Driving direction
of the vehicle