Teleco Flat Sat Elegance, Руководство пользователя

Страница: 17 / 36

16
Kit with Black Box and Sat Decoder (without Teleco TV)
This configuration will allow you to:
• Control your Black Bo x and DECODER with ONE remote control, but NOT your TV.
You can switch the Black Box and the Decoder on and off via one button.
• In this configuration, you will control the TV via its remote control as it is not part of the Kit.
The remote control is arranged in two memory banks:
• Bank 1: For TV (not available in this Kit) management.
• Bank 2: For DECODER management.
1) Total On/Off: sends the switch on/off command to the
Black Box and the DECODER and activates the memory
bank of the DECODER.
2) TV On/Off: activates the memory bank of the TV only,
and sends the switch on/off command to the TV (not
available in this Kit).
3) DECODER On/Off: activates the memory bank of the
DECODER only, and sends the switch on/off command
to the DECODER.
4) DECODER memory bank selection key: activates the
memory bank of the DECODER.
5) TV memory bank selection key: activates the memory
bank of the TV (not available in this Kit).
6) Switch on/off key for Black Box and Receiver: sends
the switch on/off command to the Black Box and to the
Receiver.
7) Antenna parking key: sends the parking command to
the Antenna.
8) Antenna satellite selection key: selects the satellite to
be searched for.
9) These keys are generally used to control the
DECODER, change the channel, adjust the volume etc.
Not all the functions indicated on the remote control
could be available: for full control of the devices you
should therefore use the remote control supplied with
your DECODER. The TV memory bank is not active in
this Kit.
Use the keys (4) or (5) to switch between the two memory
banks.
The keys (1), (2), (3), (6), (7) and (8) are always active,
irrespective of the selected memory bank.
1
2 3
4
8
7
6
5
9