Teleco Flat Sat Elegance, Руководство пользователя

Страница: 8 / 36

7
Complete Kit with Black Box, Sat Decoder and TV
This configuration will allow you to:
• Control your Black Box, TV and DECODER with ONE remote control.
You can switch the whole system on and off via one button;
• Control all the three devices via the remote control using the infrared TV sensor.
The remote control is arranged in two memory banks:
• Bank 1: For TV management
• Bank 2: For DECODER management.
1) Total On/Off: sends the switch on/off command to the
Black Box, the TV and the DECODER and activates the
memory bank of the DECODER.
2) TV On/Off: activates the memory bank of the TV only,
and sends the switch on/off command to the TV.
3) DECODER On/Off: activates the memory bank of the
DECODER only, and sends the switch on/off command
to the DECODER.
4) DECODER memory bank selection key: activates the
memory bank of the DECODER.
5) TV memory bank selection key: activates the memory
bank of the TV.
6) Switch on/off key for Black Box and Receiver: sends
the switch on/off command to the Black Box and to the
Receiver.
7) Antenna parking key: sends the parking command to
the Antenna.
8) Antenna satellite selection key: selects the satellite to
be searched for.
9) These keys are generally used to control the
DECODER, change the channel, adjust the volume etc.
If you wish to control your TV, first press the key (5). Not
all the functions indicated on the remote control could
be available: for full control of the devices you should
therefore use the remote controls supplied with your TV
and DECODER.
Use the keys (4) or (5) to switch between the two memory
banks.
The keys (1), (2), (3), (6), (7) and (8) are always active,
irrespective of the selected memory bank.
1
2 3
4
8
7
6
5
9