17
7.2 “Holiday mode”
The “Holiday mode” allows the user to temporarily lock the front cover buttons.
Note:
when the mode is activated, wireless and wired input commands are still enabled.
ACTIVATION
Press the
STOP
button in the front cover and keep
it pressed for
5 seconds
.
The buzzer makes one beep.
DEACTIVATION
Press
STOP
button in the front cover and keep it
pressed for 5 seconds.
The buzzer makes one beep and LED
starts
to flash faster.
Press any button of any memorized transmitter
within 10 seconds. The buzzer makes one beep
and LED
turns off.
5 s
5 s
...
memorized
< 10 s
...
7.1 Motor torque control
This procedure activates or deactivates the motor torque control. The control unit will costantly check the
level of current required by the motor during the movement in order to detect any anomaly in the normal
operation of the door. In case of excessive effort, the control unit will stop and reverse the manoeuvre.
Press the
P3
button of a memorized transmitter and keep it pressed for
5 seconds
. The buzzer will emit one beep.
Release and press it again
four times
within 5 seconds
and keep it pressed for
2 seconds
.
The buzzer will make
one beep
if the function is not active or
two beeps
if it is activated.
DEACTIVATED
ACTIVATED
4x
P3
memorized
P3
memorized
within 5 sec.
( 5 s)
P3 button is
located inside the
transmitter
keep it
pressed
( 2 s)
keep it (*)
pressed
(*)The procedure can be executed only
within 30 seconds from power on
.
ON