TA-7650 and TA-7750 Installation Manual
Last Revision: 9/30/11 11:23 AM
27
Protocol Converter Dongle Troubleshooting
If the MediaHub HD was installed using a Protocol Converter Dongle and it does not seem to
be working properly, lights are illuminating but TV is not auto-switching, try these
troubleshooting procedures:
A
Fully remove AC power to the TV. Then re-apply power to the TV and use the remote
control to turn the TV on. Wait 30 seconds before activating any input source into the
MediaHub HD.
B
If using a Serial Control connection to the TV, ensure the USB cable is plugged into
the USB port on the TV. This connection provides power to the converter.
C
Ensure the proper DIP Switch Mode Settings are correct on the Protocol Converter
Dongle, according to the installation instructions.
Switch One
Switch Two
ON/UP
TA-7650
RS232
OFF/DWN
TA-7630
LodgeNet
D
Ensure the proper DIP Switch Mode settings are correct on the MediaHub HD
according to the installation instructions.
UP-DWN-UP-UP DWN-DWN-DWN-DWN
Содержание TA-7500L MediaHUB HD
Страница 1: ...MediaHub ...
