Class
Implementation
Minimum Delivered Power
(PSE)
Maximum power consumed in
the device (PD)
0
By default
15.4 W
0.44 a 12.95 W
1
Optional
4.0 W
0.44 a 3.84 W
2
Optional
7.0 W
3.84 a 6.49 W
3
Optional
15.4 W
6.49 a 12.95 W
4
Reserved for Future Use
Treated as Class 0
15.4 W
Reserved for future use.
5
Reserved for Future Use
Treated as Class 0
15.4 W
Reserved for future use.
Syntax:
ethernet0/0 PSE config>default-port-consumption ?
<4500..15400>
milliWatts
Example:
ethernet0/0 PSE config> default-port-consumption 7500
1.5.4 ENABLE
This allows the device to operate as power sourcing equipment. The default value is disabled, so you will need to
specify this command to enable PSE.
Syntax:
ethernet0/0 PSE config>enable
Example:
ethernet0/0 PSE config>enable
1.5.5 LIST
This displays the current configuration for the interface’s configurable parameters.
Example:
ethernet0/0 PSE config>list
Power Sourcing Equipment .......... Enabled
Available Power ................... 140000 mW
Default Power Line Consumption ....
4500 mW
ethernet0/0 PSE config>
1.5.6 NO
This allows you to establish the default values for the options.
Example:
ethernet0/0 PSE config>no ?
available-power
Sets the amount of power available in milliWatts
default-port-consumption
Sets the default power consumption of the POE
devices connected to the switch in milliwatts
enable
Enables Power Sourcing Equipment
port
Port configuration
trace
Enable tracing
ethernet0/0 PSE config>
Teldat SA
1 Configuration
PoE Power over Ethernet
5
