Amber
Green
The device has registered in the network and is establishing
the PDP connection.
The device is registered, PDP connection is established and
IP traffic can be sent through the CELLULAR interface.
• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
L
Cellular interface
corresponding to
the active SIM.
Off
Red
Amber
Green
Cellular interface is not active.
Coverage level below -100dBm.
Coverage level between -90dBm and -100dBm.
Coverage level above -90dBm.
LAN
Ethernet LAN inter-
face
Off
Green
Ethernet LAN is disabled or connection is not established.
Ethernet connection (link) established:
• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
WAN
Ethernet WAN in-
terface (RJ45)
Off
Green
Ethernet WAN is disabled or connection is not established.
Ethernet connection (link) established:
• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
SFP
Ethernet WAN in-
terface (SFP)
Off
Green
SFP is not used.
Ethernet SFP connection (link) is established
S1
Multi standard seri-
al interface 1
Off
Green
Serial port 1 is disabled or not initialized.
Port is in active state, shows interface activity:
• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
S2
Multi standard seri-
al interface 2
Off
Green
Serial port 2 is disabled or not initialized.
Port is in active state, shows interface activity:
• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
Note some LEDs may behave differently depending on how the device is configured.
2.4.2 Connector Panel
The connector panel is covered by a protective casing. To access the former, you need to remove the latter. For fur-
ther information on how to remove/install the protective casing, please see
Removing/Installing the Connectors Pro-
on page 14.
The following figure shows the panel, which includes all Regesta Smart PRO router connectors.
Teldat S.A.
2 Product Overview
Regesta Smart PRO
9
