Teldat Dm709-I, Руководство пользователя

Страница: 8 / 110

Chapter 1 Configuring Token Ring Interfaces
1.1 Introduction
This chapter describes the Token Ring interface configuration. It includes the following sections:
• Accessing the Token Ring Configuration.
• Token Ring Configuration Commands.
1.2 Accessing the Token Ring Configuration
To access the Token Ring configuration:
(1) Enter list devices at the Config> prompt to display the list of interfaces and their interface number.
(2) Enter network, followed by the Token Ring interface name.
Example:
*config
Config>list devices
Interface
Connector Type of interface
ethernet0/0 LAN1 Fast Ethernet interface
serial0/0 SERIAL0/WAN1 X25
serial0/1 SERIAL1/WAN2 X25
serial0/2 SERIAL2/WAN3 X25
bri0/0 BRI/ISDN1 ISDN Basic Rate Int
x25-node --- Router->Node
token-ring3/0 SLOT3 Token Ring
Config>network token-ring3/0
-- Token Ring User Configuration --
token-ring3/0 config>
1.3 Token Ring Configuration Commands
Certain commands are common to all device interfaces. These commands are described in Teldat Dm772-I Com-
mon Configuration Interfaces.
The following table summarizes the Token Ring configuration commands, further explained below. Enter said com-
mands from the Token Ring configuration menu.
Command Function
? (HELP) Displays available commands or their options.
LIST Displays the selected Token Ring interface configuration.
LLC Accesses LLC configuration.
MAC-ADDRESS Configures the interface's physical address (MAC).
NO Configures default values for the configuration parameters.
PACKET-SIZE Modifies packet-size for all Token Ring networks.
RIF-TIMER Configures the Routing Information Field (RIF) timer.
SOURCE-ROUTING Enables or disables source-routing on the interface.
SPEED Sets the interface speed in Mbps.
EXIT Exits Token Ring configuration.
1.3.1 ? (HELP)
Displays the available commands and their options.
Syntax:
token-ringX/X config>?
1 Configuring Token Ring Interfaces Teldat SA
2 LAN Interfaces