2.3.2 LLC
Accesses the LLC monitoring menu and allows the user to enter the LLC monitoring commands. Please see the
LLC
monitoring commands
section for a description on these commands.
Syntax:
token-ring
X/X
TKR+LLC
Example:
token-ring3/0 TKR+LLC
LLC user Monitoring
token-ring3/0 LLC+
2.3.3 RIF-DUMP
When
source routing
is enabled on the Token Ring interface (see the section on Token Ring configuration com-
mands), rif-dump displays the content of the RIF cache. The rif-dump command only applies to protocols, it does
not apply to DLSw or bridging.
Syntax:
token-ring
X/X
TKR+RIF-DUMP
Example:
token-ring3/0 TKR+RIF-DUMP
MAC Address
RIF
=================
===============
00:00:C9:1E:ED:5C
0620 0011 0020
token-ring3/0 TKR+
The meaning of each field is as follows:
MAC Address
Token Ring interface MAC address in non-canonical format.
RIF
Displays a code that indicates the RIF in hexadecimal format.
2.3.4 EXIT
Returns to the (+) general monitoring menu.
Syntax:
token-ring
X/X
TKR+EXIT
Example:
token-ring3/0 TKR+EXIT
+
2.4 Token Ring Interfaces and the Interface Monitoring Command
The router displays statistics for network interfaces when you enter device at the monitoring menu prompt (+).
2.4.1 DEVICE
At the monitoring menu prompt (+), enter device and the name of the interface. The following statistics are then dis-
played for the Token Ring interface chosen.
Syntax:
+DEVICE <TKR interface name>
Example:
+DEVICE TOKEN-RING3/0
Teldat SA
2 Monitoring Token Ring Interfaces
LAN Interfaces
7
