This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
C.3.1.1.1 FCC 68
Customer Information
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
At the bottom
of
this equipment, there is a label that contains, among other information, a [US: TLDDL01BTLDPV00A1] product iden-
tifier. If requested, this number must be provided to the telephone company.
If this equipment [Enterprise Router] causes harm to the telephone network, the telephone company will notify you in
advance that a temporary discontinuance of service may be required. But if advance notice isn't practical, the tele-
phone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint
with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone company will provide advance notice in order for you to
make necessary modifications to maintain uninterrupted service.
If you experience trouble with this equipment, you disconnect it from the network until the problem has been correc-
ted or until you are sure that the equipment is not malfunctioning.
Please follow the repair instructions, if any (e.g. battery replacement section). Otherwise, do not alternate or repair
any parts of the device that were not specified.
If the telephone company requests information on what equipment is connected to their lines, inform them of:
(a) The telephone number that this unit is connected to,
(b) The ringer equivalence number [01]
(c) The USOC jack required [RJ11C], and
(d) The FCC Registration Number [TLD]
Items (b) and (d) are indicated on the label. The ringer equivalence number (REN) is used to determine how many
devices can be connected to your telephone line. In most areas, the sum of the RENs of all devices on any one line
should not exceed five (5.0). If too many devices are attached, they may not ring properly.
Service Requirements
In the event of equipment malfunction, all repairs must be performed by our Company or an authorized agent. It is
the responsibility of users requiring service to report the need for service to our Company or to one of our authorized
agents. Service can be facilitated through our office at:
Company Name: Teldat Corp
Contact Name: Ignacio Loizaga
Address: 15466 Los Gatos Blvd
Suite #109-335
Los Gatos CA 95032
Telephone No: 408 892 9363
Fax No: 408-608-2172
Email: [email protected]
Regulatory compliance and Safety information
Teldat S.A.
26
Teldat Router Connect-104V
