Bottom panel elements table
Item
Description
A
SIM tray for internal cellular WWAN. This is accessed from the underside of the
router.
B
Platform where the label that contains product information is placed. This label
contains information on the device model, mac, serial number, etc.
C
Slots for wall mounting.
3.1.5 Top Panel (LEDs)
The LED panel provides information on the status of the components (whether or not they are active) and on network
activity.
Fig. 6: LED panel
The Teldat Connect 104V LEDs are shown in the above figure. The below table contains a description of each one.
LED table
LED
State
Description
Power
Monochrome
Green
Off -> not receiving power from PSU.
On -> receiving power from PSU.
Alert
Monochrome
Green
On -> when software is running.
USB
Tricolor
Off -> system is powered off.
Red -> interface not available, not supported or auto-test failure.
Amber -> idle.
• Rapid blinking. It hasn’t registered in the network or the quality is insuffi-
cient.
• Slow blinking. GSM connection (GPRS).
• Steady. WCDMA (UMTS/HSDPA) or LTE connection.
Green -> connected. Blinking: connection data activity.
Wi-Fi
Bicolor
Red -> interface down.
Green -> interface up.
3 Components and Power Supply
Teldat S.A.
6
Teldat Router Connect-104V
