Teldat BinTec Elmeg DECT200, Руководство пользователя

Страница: 64 / 125

elmeg DECT200 Multicell System / en / elmegDECT200M_en / web-conf.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
63 elmeg DECT200 Multicell System
bintec elmeg Configuring the system on the DECT Manager
Example:
Subnet mask
The Subnet mask specifies how many parts of an IP address the network prefix must
comprise.
For example, 255.255.255.0 means that the first three parts of an IP address must be the same
for all devices in the network, while the last part is specific to each device. In subnet mask
255.255.0.0, only the first two parts are reserved for the network prefix. Enter the subnet
mask that is used by your network.
Default Gateway
Enter the IP address for the standard gateway through which the local network is connected
to the Internet. This is generally the local (private) IP address for your router/gateway (e.g.,
192.168.2.1). Your DECT Manager requires this information to be able to access the Internet.
Preferred DNS server
Enter the IP address for the preferred DNS server. DNS (Domain Name System) allows you to
assign public IP addresses to symbolic names. The DNS server is required to convert the DNS
name into the IP address when a connection is being established to a server.
You can specify the IP address for your router/gateway here. This forwards address requests
from the DECT Manager to its DNS server.
There is no default setting for a DNS server.
Alternate DNS server
Enter the IP address for the alternate DNS server that should be used in situations where the
preferred DNS server cannot be reached.
Device Name in the Network
The product name of the DECT Manager is displayed in this field. You can change this name
to identify the device in the network.
Configuring a HTTP proxy
¤
Select whether you want to release a separate proxy server in the network for your DECT
Manager.
¤
If Yes , enter the IP address for the proxy server in the Proxy server address field.
¤
The default setting for the Proxy server port is 80. Change this if your server uses another
port.
Router IP address: 192.168.2.1
Network subnet mask 255.255.255.0
DHCP server address block 192.168.2.101 – 192.168.2.254
Possible IP addresses for the DECT Manager 192.168.2.2 – 192.168.2.100