3.4 IP configuration
In the ex works state, your device is configured in DHCP Client mode and dynamically receives an IP address if you
run a DHCP server in your network. Otherwise, connect your device directly to the configuration PC and use fallback
IP address
192.168.0.252
.
Alternatively, you can use Dime Manager to assign a required fixed IP address.
To do this, install the program on your configuration PC.
After installation, carry out the following steps to configure an IP address on your device:
(1)
Start the Dime Manager from the Windows Start menu: Start -> Programs ->Dime Manager.
The Dime Manager initial screen appears:
Fig. 3:
Dime Manager
- initial screen
The Dime Manager detects the devices installed in the network.
(2)
Double click on the device you want to configure from the list.
The following dialog box appears:
Fig. 4: IP address allocation using
Dime Manager
(3)
Enter the network parameters (Device name, IP address, Netmask and Gateway) and click on OK.
Note
The maximum length of the Device name parameter is 32 characters.
The Device name parameter may only contain letters "a"-"z", "A"-"Z", digits "0"-"9", a dash "-" and a dot
".". The first character must be a letter, and the last character cannot be a dot (".") or dash ("-"). A single
character cannot be used as name.
Teldat SA
3 Basic configuration
APR222ac
9
