28
Tmedia System Installation Guide for TMG3200
3.4
Changing the TMG3200 Host IP
A static IP address can be assigned to eth0, instead of using DHCP. To do this connect to the serial port
(see Section 2.3 “Connecting to the Tmedia Management Interface” on page 9) and open the eth0
configuration file, using the procedure described in the Telcobridges TB Wiki at:
http://docs.telcobridges.com/mediawiki/index.php/TBLinux:How_to_change_the_ip_address
To return ETH0 to using DHCP, open the ETH0 configuration file, using the same procedure described
in the Telcobridges TB Wiki at:
http://docs.telcobridges.com/mediawiki/index.php/TBLinux:How_to_change_the_ip_address
3.5
Changing VoIP Interface Addresses
The default address of the VoIP interfaces of the TMG3200 can be modified. To learn how this is done,
refer to the Toolpack Web Portal tutorial guide on the Telcobridges TB Wiki at:
http://docs.telcobridges.com/mediawiki/index.php/Web_Portal_Tutorial_Guide_Versions
3.6
Changing Passwords
Once logged in to the TMG3200, type “passwd”, in order to change the password being used. The
following information will be displayed:
[root@TB003540 ~]# passwd
Changing password for user root.
New UNIX password:
Retype new UNIX password:
passwd: all authentication tokens updated successfully.
