Equipment Connections
7
2.2
Rack mounting the TMG3200
The TMG3200 is mounted on a customer provided equipment rack using the mounting hardware
packaged in the box.
2.2.1
Prerequisites
To rack mount the TMG3200, you will need:
•
One 19” customer provided equipment racks. The rack must be solidly anchored to the floor with
appropriate support at the top of the racks.
•
Climate controlled room: 0 to +50 Celsius, 0 to 95% non-condensing humidity.
2.2.2
Vertical Placement of TMG3200
The TMG3200s are housed in either a 1U or 2 U chassis, as tabulated in table 2.1 on page 7. It is
important that you provide for enough room on the equipment rack to allow for the installation of the
TMG3200. Consider the available space on your equipment rack and the height of the TMG3200. Due
to the rear-exhaust heat vents and the efficient heat dissipation design, there is no need to leave any
physical vertical space above or below the placement of the TMG3200 on the equipment rack.
Table 2.1
TMG3200 Physical Height
Tmedia Model Number
Vertical Height
TMG3201
1U
TMG3202
2U
Patch Panels
a
a. TMG3200s configured with a 32 to 64 T1/E1 TDM module require one patch panel for each 32 E1/T1 line grouping.
1U
