26
Tmedia System Installation Guide for TMG3200
3.1
Configuring the TMG3200
The TMG3200 comes with the Toolpack and Media Gateway applications pre-installed. In order to
make changes to system configuration, you must connect the front port (labelled Ethernet) of the
TMG3200 to a terminal.
The IP address of the TMG3200 is assigned automatically through DHCP, however, default
configurations can be changed manually.
The default hostname is the serial number of the embedded host. This can be found on the packing slip
along the “TM-CPU-HOST” item.
If the hostname is not known, it can be found using the front serial connection. Login with a user name
and password. This information is located on the shipment sheet. Type the command “hostname” or
“ifconfig –a”:
[root@TB003540 ~]# hostname
TB003540
[root@TB003540 ~]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0C:38:00:0C:39
inet addr:10.0.0.236 Bcast:10.0.1.255 Mask:255.255.254.0
inet6 addr: fe80::20c:38ff:fe00:c39/64 Scope:Link
You can connect using the hostname or using the IP address assigned to eth0, using
port 12358:
http://HOSTNAME:12358
For example: http://TB003540:12358
