Telair TIG 3000G, Руководство по эксплуатации и обслуживанию

Страница: 7 / 44

Vers. 001
TIG 3000 G
7
GB
1 GENERAL INFORMATION
The generating set
TIG3000G
, shortly referred to
as generator here below, is designed to be in-
stalled on vehicles, although this does not ex-
clude its use in stationary applications requiring a
versatile, stable and reliable power source, apply-
ing the latest technology.
It consists of an internal combustion Otto-cycle
engine, a high frequency three-phase alternator
and an inverter able to deliver 230 V 50 Hz alter-
nating voltage and 12 V direct voltage to charge
the connected battery.
It is enclosed in a steel plate casing, insulated
and sound-proofed using special sound absorb-
ing materials.
The engine fuel is
LPG
in a gaseous state.
Where the fuel is compatible, it can be taken from
the tank set aside for camper utilities or the vehi-
cle fuel tank. If the fuel is not compatible it will be
necessary to connect up a bottle or install an
LPG tank; in any case, they must have a suitable
pressure reducer
The generator can be controlled traditionally via
the remote control panel (supplied), which can be
installed inside the vehicle, or via a domotics con-
trol unit (Teleco HUB, optional).
As part of its product development and upgrade
policy, the manufacturer reserves the right to in-
troduce modifications without prior notice.
2 CHARACTERISTICS
2.1 Technical Specifications
Output voltage: V ac
230 ± 2%
Output frequency: Hz
50 ± 1
Maximum continuous power: kW
2.5 @ cos Φ 1
Maximum peak power: kW
2.7 (including consumption of the battery charger)
Engine:
Yamaha MZ175-30ise, single-cylinder air-cooled
Displacement: cm³
171
Start:
electric
Power supply:
LPG in a gaseous state (butane or propane, depending on
ambient temperature)
LPG pressure: mb
30 (higher pressures damage the generator)
Average consumption: g/kWh
350 (at max power)
Oil sump capacity: litres
0.6
Battery voltage: V dc
12 V
Battery charger voltage: V dc
13.6 V
Battery charger current: A
10 max
Battery capacity: Ah
> 40 with inrush current >60 A
Current consumption in Off
state:
mA
<= 0,5
Current consumption in
Stand-by state:
mA
<= 60
Control:
Electronic control panel, remote switch or domotics control
unit (Teleco HUB)
Operating temperatures: °C
-20 ÷ 40
Generator only weight: kg
53
Total weight: kg
62
Noise level: dBA
52 ÷ 60 @ 7 m, depending on the connected load