Telair TIG 3000G, Руководство по эксплуатации и обслуживанию

Страница: 23 / 44

Vers. 001
TIG 3000 G
23
GB
9 MAINTENANCE INSTRUCTIONS
9.1 Maintenance schedule
(1) First replacement
Before performing any check or main-
tenance operation on the generating set, turn
the ON/OFF switch of the control panel to its
OFF position and the safety switch of the
control panel to its O position.
This way you can operate under safe condi-
tions as the generating set cannot start up.
If it is necessary to work on the electrical wir-
ing system or on one of the electronic
boards, remove the fuse provided on the di-
rect supply positive line to the generator or
disconnect the line from the battery.
Only use original spare parts. Using
poorer quality spare parts may damage your
generating set.
Periodic inspection and maintenance are es-
sential to preserve the generator performance
and ensure its long working life.
For more information on the mainte-
nance of the engine, please refer to the tech-
nical manual of the engine manufacturer,
supplied together with the generator.
9.2 Checks not requiring skilled personnel
To perform this kind of inspections, it will be nec-
essary to open the door of the generating set.
The following precautions must therefore be
taken:
1) The generator must not be running.
2) All its parts must be cold.
9.2.1 Checking the engine oil level
Engine oil level checking must be car-
ried out with the engine stopped and with a
perfectly horizontal generating set.
Unscrew the engine oil cap (fig. 35 ref. 1), wipe
the dipstick clean if required, screw it back in its
seat and then unscrew it again to obtain an accu-
rate lubricant level reading. The dipstick must be
ROUTINE MAINTENANCE SCHEDULE
Performed to the achievement the condition that occurs first 50 hours
or 4
months
100
hours or
one year
300
hours or
one year
500
hours or
one year
Engine oil
Level check
●
Replacement
●
(1)
●
Engine valves Chek and adjustment
●
Air filter Chek (repalce if necessary)
●
Ventilation ducts Inspection and cleaning
●
Engine vibration damping
mounts
Check (replace if necessary)
●
External vibration damping
mounts
Check (replace if necessary)
●
Fuel pipes Inspection (replace if
necessary)
●