Tektronix WFM4000 Series, Руководство пользователя

Страница: 36 / 79

Getting Acquainted With Your Instrument
Using Waveform/Vector Display Overlay
TandemVu® is a patented display that allows you to overlay the Waveform and Vector or Waveform and Lightning displays,
plus Picture Thumbnail, in a single, full-tile display. You can then view waveform and vector displays, or waveform and
Lightning displays, at the same time. This feature allows you maximum visibility of each trace.
To set up WFM/Vector display
overlay
NOTE. You can overlay the Vector display
on the WFM display or the WFM display over
the Vector display. Both overlay options are
selected in the display pop-up menus. If you
want to overlay the Lightning display,
fi rst
select Lightning from the Vector menu, and
then proceed to select overlay.
The following procedure shows how to set up
the Vector over WFM overlay. To set up the
WFM over Vector overlay, select the Vector
button instead of the WFM button.
1. Press and hold the WFM button to view
the WFM display and the WFM pop-up
menu.
2. In the pop-up menu, navigate to Display
Overlay and select WFM & VEC .
The Vector display will be overlaid on the
WFM display.
3. Press the WFM button to dismiss the
pop-up menu.
20 WFM4000 and WFM5000 Waveform Monitors User Manual