manualshive.com logo in svg

Tektronix WFM 601A, Руководство по обслуживанию, Страница: 45 / 368

Поделиться
Скачать
Tektronix WFM 601A Скачать руководство пользователя страница 45

WFM 601A, WFM 601E, & WFM 601M Service Manual

2–9

Operating Information

This section provides a brief description of the waveform monitors front- and
rear-panel features and connections. For detailed operating information, refer to
the User manual for the specific model.

Front Panel Overview

Figure 2–6 shows the front panel of the WFM 601M waveform monitor. The
front panels for the WFM 601A and WFM 601E waveform monitors are similar.
A brief discussion of each front-panel feature follows the illustration. Features
that are unique to one or two waveform monitor(s) are indicated in the discus-
sions. For detailed information about the operation of the waveform monitor,
refer to the Reference section in the user manuals.

Figure 2–6: The WFM 601M waveform monitor front panel

Содержание WFM 601A

















































































































































































































































































































































































Отзывы:

Нет отзывов